Faucets are an indispensable part of a home structure and keeping them in a good working condition is imperative. A leaky faucet not only disturbs sleep and adds to the water bill but also causes an inconvenience that might range from annoying to catastrophic. The typical causes for a leaky faucet include corrosion, mineral deposit on the internal parts, or defective gaskets, o-rings, or washers. Luckily, most faucets that leak can be fixed by homeowners if they have the right tools and some basic knowledge of plumbing. Ignoring a faulty faucet can turn a simple repair of $200 into a $1,000 plumbing replacement project. Besides, a dripping faucet leads to a waste of over a hundred gallons of water every month.
The United States Environmental Protection Agency reveals, “On an average, leaks can cause almost 10,000 gallons of wastage in a home every year, and this amount is sufficient to fill a swimming pool. The most common issues of leakage are a dripping faucet, leakage in toilet flappers, or leaking valves, all of which can be easily fixed. However, among these, the most prominent leakage issue is caused by a dripping faucet; fixing one can save almost 10% of a homeowner’s water bill.”
There may be several reasons behind why your faucet is dripping. Below we review some of the most common causes of a leaky faucet.
A stem screw is used to hold the handle of a faucet in place. This stem screw includes a small disc attached to it, known as the O ring. This is an integral place where dripping can occur. However, the O ring can become loose or wear out over regular use, causing the faucet to drip near the handle. Replacing the damaged O ring will fix it if this is the issue. This problem occurs specifically in cartridge faucets.
A valve seat serves as a connection between the faucet and the spout in the compression mechanism. Accumulation of water sediments can cause the valve seat to corrode, thus, causing leakage around the spout area. Make sure that you clean the valve seat regularly with the help of a professional plumber. Call Hansen’s Plumbing.
This is one of the most common causes behind a dripping faucet. During each use, the washer is forced against the valve seat, and this constant friction causes it to wear out. As a result, dripping is noticed around the spout. Dripping caused by worn-out rubber washers can be mended by replacing the washer. This type of leak is found in a compression faucet.
Often, if the washer is not installed properly or is not the right size, thus, it can cause a leaky faucet. We suggest hiring a professional plumber to help you install the washer properly, allowing you to say goodbye to your leak.
The drain clog and the slow drain are, unfortunately, basic problems for plumbing systems that can never be completely banished even with a Ventura Commercial Plumber. Whether you’re a local business owner or a commercial property owner, you may need to schedule drain cleaning or other major drain and sewer line repairs through a Ventura Commercial Plumber. But a clogged drain shouldn’t be a regular occurrence. And you shouldn’t see water backing up through drains when you run the washing machine, or water come up through a shower drain the nearby toilet is flushed. These indicate bigger clogging issues in the sewer line—and that’s when a pipeline inspection is the best option with a Ventura commercial plumber. Here at Hansen’s Plumbing, we have a Ventura Commercial Plumber ready to help you with any and all of your plumbing needs.
In the bad ol’ days of plumbing, trying to figure out what was going wrong in a residential or commercial sewer line took plenty of guesswork. Even the best plumbers could guess wrong, making it necessary to try a few times to discover the best way to fix the problem. This often involved digging. Thanks to modern pipeline inspection equipment, a plumber can rapidly discover what’s gone wrong by looking at the pipeline from the inside. There are many benefits to using this technology:
Trying to diagnose the trouble with a sewer line can mean a lot of trial-and-error. Pipeline inspection equipment cuts down on how long it takes to discover what repairs or cleaning needs to be done to fix the sewer line. All the plumber must do is insert a fiber optic cable with a digital camera and LED light at its end down into the clean-out for the sewer line. The plumber can then see the pipe from the inside on monitors and have answers in only minutes.
There are many different potential problems with sewer lines: tree root infiltration, extreme corrosion, the build-up of solid debris, sagging pipes, and FOG (grease, fats, and oils). Each requires a different repair solution. A pipeline inspection gives a plumber an exact diagnosis of the trouble and the best way to deal with it. (And this helps make the process go even faster.)
Before video pipe inspection services became common, the brute force method of finding out what was wrong with a sewer line was to dig down to the pipe itself. Not only did this take up time, it made a mess across the property as well, and it meant extra work to re-landscape the area after the work was done. Pipeline inspection equipment goes in laterally—no need to dig at all.
No matter the size of your home or business, it’s vital that you only permit a licensed plumber to handle inspection of your property’s sewer line. The equipment is not only too expensive for you to purchase just for this one job, it also requires extensive training to operate correctly—not to mention be able to do the repair work necessary afterward. Rely on Hansen’s Plumbing for great pipeline inspections in Ventura
Summer is almost everyone’s favorite season, and about that time for plumbing pipe service. People go on vacation, kids are home from school, and there’s something to do every weekend. Everyone can’t help but feel good from all the vitamin D they’re soaking up. Among all the other things that happen during the summer, there are also changes to your plumbing ecosystem happening every year. Warm months can be hard on your plumbing. The heat and activity put your pipes and fixtures under new and varied strains. The best way to handle these new strains are to be prepared for them with a plumbing pipe service. Check out the most common summer plumbing issues and how to address them.
More people in your home leads to more stress on your plumbing system.During the summer, there are more people at home all at once. Kids are out of school and home more often, and usually less cognizant of plumbing best practices than adults. Pay closer attention to common plumbing problems like clogged drains, garbage disposal best practices, and the like. This attention can help you keep small problems from getting big in the face of increased summer foot traffic.Having a plumbing pipe service will prevent many problems from occuring.
Outdoor plumbing fixtures commonly develop rust, cracks, and leaks during off months. It’s high time you check on your outdoor plumbing fixtures. This includes looking at outdoor faucets for cracks and leaks, your gutters for back-ups, and sprinklers. Sprinklers especially. If you water your lawn or have kids at home, your sprinkler is likely a close friend during the summer. They can cause a lot of waste if they’ve developed unnoticed cracks or leaks during the cold months. Fix them with a plumbing pipe service early in the season so you can enjoy them without upping your water bill later on.
Gas or sewer line disturbances due to summer planting. June, July, and August are an ideal season for gardening. Whether you’re planting tomatoes, cucumbers, peppers, or squash – you have to pay attention to where it’s going. Gas and sewer lines are frequently located in your yard. Know where they are before you dig and make sure you’re not about to cut into any pipes with your shovel.
No matter the time of year, day of the week, or hour of the day, Hansen’s Plumbing has your back. Call us when you need help protecting your home’s plumbing in the summer, or any other time of year in California.
Early plumbing leak detection needs to be a priority in California, for both home and business owners. Water pipes succumb to leaks for several reasons, primarily from corrosion.
Hansen’s Plumbing Leak Detection Specialist will preform a Non-Invasive leak detection assesment. Water dripping behind walls, under floors, and a lot of other places most people don’t notice, until significant damage is done. The longer they are allowed to continue, the damage is done.
Beside the high repair costs and water loss, there are also health risks associated with a water leak. Harmful mold and mildew, along with contaminants which can make the water harmful to consume.
Keep an eye on your water bill. If it is higher than normal it can mean you have a leak. Test your water meter by turning all water and water using appliances off. Check the reading on the water meter. Check back in about 20 to 30 minutes. The meter should have the same reading and should not be showing a consumption.
Listen for any sounds of water running when everything is turned off. If you can hear it, you may have a leak.
Warm areas on the floor is an indication of a slab leak. Check for any discoloration or stains on the walls or floors. Also, look for any unexplained mold or mildew. Or if you notice a musty odor inside your home.
Because plumbing pipes are mostly contained behind the scenes, finding them isn’t always easy. That’s why it is typically more economical to have the help of a Hansen’s Plumbing professional.
Simple leaks can quickly turn into costly problems, often times we don’t notice the problem until it’s too late. It’s important to stay up to date and vigilant with your homes or business maintenance. Call Hansen’s Plumbing today for a free estimate in California.
Common Plumbing Problems
Research shows that homeowners, depending on the age of their home, will call a plumber once every three years for common plumbing problems! To some this may seem like a lot, but others they might get a visit from a plumber every year.
There are many different types of plumbing problems, but here at Hansen’s Plumbing, we’re always asked “is this a common problem?” Though we’ve seen a wide variety of plumbing problems from large to small, we generated a list of common plumbing problems that our technicians most commonly see in the homes they service.
Let’s face it, we’ve all had a dripping faucet in our home and have probably ignored it for a while! That dripping faucet not only wastes water, it wastes money on your water bill. Find out how much that drip is costing you.
While we see a lot of leaking pipes during the cold winter months, it’s also very common year-round! Most pipes will begin to leak near the joints, so keep an eye out for wet spots on the ground or ceiling. Water damage to your home can be quite costly, so leaky pipes are a necessity to fix right away.
Did you know that a running toilet can waste up to 200 gallons per day? That’s a lot of water waste! Call Hansen’s Plumbing to understand why this internal water leak can be costly to your home.
A lot of older homes will experience low water pressure, but you may be asking why? It could be time for a new shower head or you could have a hidden leak in your home. However, those are just a few of the many reasons for low water pressure.
A leaking hose bibb is very common in the spring and summer. After a long, cold winter many hose bibbs that aren’t protected can crack and begin to leak. We advise our customers invest in a frost-proof hose bibb, which can reduce the chances of having future leaks.
Our expert technicians warn customers to stay away from any type of over-the-counter drain cleaner! Instead, give us a call to clear the slow or clogged drain. In the meantime, call Hansen’s plumbing for maintenance tips to keep your drains moving smoothly.
A prolonged period of heavy rain can cause your sump pump to fail. Protect your home and belongings from common plumbing problems with Hansen’s Plumbing.
You wake up in the morning and step into the shower to feel cold water on your body — trust us, we know it’s the worst feeling! The average life of a water heater can be anywhere from eight to twelve years depending on yearly maintenance.
No matter if your plumbing problem is common or not, our expert technicians can handle anything!
To take care of your leaky faucet, clogged drain, or any other plumbing issue just give Hansen’s Plumbing a call or schedule an appointment online. We’re always here to provide you with Same Day Service, 7 Days A Week in California.
Home renovations whether it’s the bathroom or the kitchen can revitalize your home and create the room you’ve you always dreamed about. You’ll spend months researching and going through all the different steps, so you can finally begin. While you might consider everything from appliances to contractors, there are some aspects regarding plumbing service that people don’t consider.
Renovations can be exciting, and people often want to make everything perfect since it will be years before anything new happens. It can be tempting to move a stove or sink from one location to another, but be careful. The installation and adjustment of plumbing and gas lines can add up. Talk to a plumber beforehand and get an estimate. They may have to go through concrete or other materials that can add time or cost to the installation. There may also be pipes that need to be replaced or other unforeseen problems.
Your plumbing fixtures as such as bathroom sinks, bathtubs, showers and kitchen sink will be the ones you’re stuck with for a decade or more. You don’t want to do renovations every few years, so get the plumbing fixtures you want now instead of regretting it later. You may think that fancy fixtures are outside the budget, but would you rather spend a little extra to get the best or regret your decision for a decade? Keeping a tight rein on your budget is important, but so is having a satisfying result. The fixtures will be front and center no matter what room you’re renovating, so get the ones you really want.
When you’re renovating, you’re adding many items to the budget. Everything from the cost of appliances, shipping, contractors, etc. The budget can get high fast, but don’t forget to account for unexpected expenses. There’s a general rule that you need to set aside about 20 percent of the budget for “just in case.” You may find that the contractors need more time, the price of the stove is more than thought or the sink you ordered wasn’t the right size. There are many unexpected costs that add up quickly, so keep that in mind when creating a renovation budget.
If you need helps with quotes for a home renovation or any other plumbing issues, then feel free to contact us today.