Backflow Testing Services
Because emergency plumbing needs immediate attention. Don’t wait!
We are open 24/7. Call us now!
Do you have a leaky faucet, clogged drain or any plumbing maintenance?
Schedule an appointment now!
Is Your Water Protected? Schedule Backflow Testing in Ventura County, CA, for Only $75!
Backflow issues can sneak up on you, but they’re easily preventable with a quick and affordable backflow test. For just $75, our licensed experts at Hansen’s Plumbing will thoroughly inspect your backflow prevention system, ensuring that your water supply is safe from contamination. We understand the importance of clean water, which is why we make this process quick, easy, and affordable. Protect your home or business today!
*Commercial rates differ, please contact for pricing*
What Is Backflow Testing?
Backflow testing is a vital process that ensures water flowing into your property remains clean and free from contaminants. Backflow occurs when water pressure changes, allowing contaminated water to flow back into the public water supply. This can be caused by anything from a broken main to high demand during a fire emergency. Testing your backflow prevention devices regularly is crucial for safeguarding both your property and the community’s water quality.
How Our Backflow Testing Services Work
At Hansen’s Plumbing, your safety is our priority. Backflow can contaminate your water supply, so regular testing is essential. With our backflow testing services, our technicians ensure your system is working properly, so you can be confident your water is safe. Here’s how our testing services work:
Initial Inspection
Our licensed technician will inspect your water system and backflow prevention device to determine the best approach for testing.
Shut Off Water
(If Necessary)
To ensure accuracy, we may temporarily shut off your water supply while we test the backflow prevention device.
Testing the Device
We’ll set up pressure gauges and test the backflow device to make sure it’s functioning properly and preventing any contamination.
Report & Next Steps
After testing, we’ll provide a detailed report. If your system passes, we’ll reconnect everything. We’ll recommend next steps as needed.
Why Backflow Testing Is Necessary
Backflow prevention devices are designed to block contaminants from entering the clean water supply, but they require regular testing to ensure they’re functioning properly. Over time, these devices can degrade due to wear, mineral buildup, or mechanical failures, which compromises their ability to protect against backflow.
Regular backflow testing services help identify and resolve any issues before they pose a health risk. Most local governments mandate annual backflow testing for properties with backflow prevention devices to ensure continuous protection.
Benefits of Backflow Testing Services
Regular testing is an easy and affordable way to prevent expensive repairs and water contamination. By catching issues early, you can avoid more expensive fixes in the future and keep your water system working smoothly. With routine testing, you can ensure your home or business is compliant with local regulations and always protected. Here’s why backflow testing services are important:
Protects Your Water Supply
Backflow testing ensures that harmful contaminants don’t enter your water supply, keeping your drinking water safe and clean.
Ensures Compliance
Regular backflow testing ensures your system meets local health and safety codes, helping you avoid fines and penalties.
Prevents Costly Repairs
Identifying potential backflow issues early helps you avoid expensive repairs and long-term damage to your plumbing system.
Peace of Mind
Routine backflow testing gives you confidence that your water system is secure, protecting your home, family, or business from contamination.
Government Resources and Requirements
California has strict regulations surrounding backflow prevention and testing. According to the California State Water Resources Control Board (SWRCB), backflow prevention devices must be tested annually to comply with state health and safety codes. In many municipalities, such as those in Los Angeles and Ventura counties, local water authorities enforce this annual testing requirement.
Failure to comply can lead to fines, and in some cases, discontinuation of water service until the backflow prevention device passes inspection. For more information, you can visit the SWRCB’s backflow prevention page here.
Certification Requirements for Backflow Testing in California
In California, only certified testers are authorized to conduct backflow testing. Certified testers must pass a certification program approved by the California-Nevada Section of the American Water Works Association (AWWA) or another state-approved certifying body. To become certified, testers complete a course that covers proper testing procedures, device installation, and maintenance practices, followed by a written and practical examination. Certified backflow testers must renew their certification every three years to ensure they remain current with evolving standards.
Backflow testing is not only essential for safety and regulatory compliance but also ensures peace of mind that your water remains clean and safe. At Hansen’s Plumbing, we provide certified backflow testing and maintenance services, so you can trust that your system is always up to code and operating reliably. Protect your property and the community’s water—contact Hansen’s Plumbing today!
Frequently Asked Questions
Yes, Hansen’s Plumbing and our technicians are fully certified by the state of California and registered with the City of Ventura and other local water purveyors to perform official backflow testing.
The cost for a standard backflow test is based on a set fee. Please call us for our current, competitive pricing. We provide a clear, upfront cost before any work begins.
As long as the backflow device is located outside and is accessible, you do not need to be home for the test. We will simply need to briefly turn off the water to the device during the procedure.
Yes, our state certifications are valid throughout all of Ventura County, including Oxnard, Camarillo, and Thousand Oaks. We are qualified to test and certify your device.
The test itself is very fast, usually taking 20-30 minutes. The water supply to the device will only be shut off for a small portion of that time, minimizing any disruption.
The certification involves filling out a specific form provided by your water authority with the device’s serial number, test results, and our official certification number. We handle this entire process for you.
If your device was stolen, call us immediately. We can provide an estimate for a and also install a heavy-duty to prevent it from happening again.
No, for a test to be valid for compliance purposes, it must be performed by a licensed professional with a currently calibrated gauge, and the results must be submitted by that certified individual.
The most common reason for failure is simple wear and tear. Over time, rubber seals and O-rings can dry out and crack, or debris can get lodged in a check valve, preventing it from closing completely.
Yes, we are certified and equipped to test all types and sizes of backflow prevention devices, from residential irrigation systems to large commercial and fire line assemblies.
Yes, we understand that deadlines can be missed. Call us and explain your situation, and we will do our best to provide expedited testing service to help you avoid any potential penalties.
Get a Free Backflow Testing Estimate!
Your water quality is too important to leave to chance. Let Hansen’s Plumbing handle your backflow testing needs with professionalism and care. We’ll ensure your system is safe, compliant, and in top condition. Schedule your backflow test today!